Hello Team,

I purchased the HOME DESIGNER - BUNDLE 2024 last month for my building layout development. I was facing some issues with bridging between FloormapEditor to HomeDesigner.

Issue 1: While setting up the room in Floormapeditor. I can't see the last room wall when I press the wall icon.

https://drive.google.com/file/d/1UOh4543IfraKH8I7qhydipXa2UC57bvp/view?usp=sharing

Issue 2 : After setting up the whole layout in Floormapeditor. When I create the project from saved layout data in HomeDesigner. I can only see the layout's Outer wall when I press the wall button. I can't see the interior wall as in Floormapeditor.

https://drive.google.com/file/d/140GQJ1KQGmtduVHh3GxbDeNQPv3yhESe/view?usp=sharing

Issue 3. When I placed windows or doors on the wall, I couldn't see that from outside.

https://drive.google.com/file/d/1qXWc_y107HFyiUh-5EtUmVSTI1cb-vFV/view?usp=sharing
https://drive.google.com/file/d/1Q8ZyrkCba6xppW7Gel3D-C0na5TeiUee/view?usp=sharing

Please guide me ASAP

    Raj_13 Hi! Sorry for the late reply.

    1. You seem to have drawn a room inside a room, this is unfortunately not supported. that's why you have wall issues at the moment. The rooms can only be drawn side by side, and you can draw "openings" on walls to connect rooms

    2. It's due to the same problem

    3. There are 2 types of windows. If you place your windows in the Floor Map editors, then they are creating holes in the walls, so you can see them from inside and outside.
      But if you add windows from the Home Designer side, then there are more like furniture, it's just a 3d objects that you put against a wall

    Hope that helps!

        Write a Reply...